TC/IP sąsaja Roger UT-4DR

UT-4DR interface is a device enabling communication with RACS 4 access control system through 10/100 BaseT Ethernet network. Apart from this main function, it is equipped also with 4 universal Input/Output lines which can be managed using web browser or by means of Telnet protocol.
This feature gives possibility to use the device in other application as a remote I/O port, managed by means of computer network. UT-4DR electronic module is put into plastic enclosure dedicated to mounting onto standard DIN rail.

NOTICE! Using UT-4DR requires PR Master software in version 4.4.6 or higher.

• power supply 10-15 VDC
• average current consumption 55 mA
• IP/Ethernet communication interface for RACS 4 system
• configuration by means of web browser
• LAN/WAN 100/10 Mb/s operation
• static or dynamic IP address
• 4 general purpose I/O lines
• 4 universal I/O lines managed by web browser or Telnet protocol
• can be used outside RACS4 system as remote I/O port managed by Ethernet network
• plastic enclosure for DIN rail
• dimensions: 85.0 x 62.0 x 73.0 mm (height x width x thickness)
• weight: ≈110.0 g
• CE mark
• environmental conditions of operation:
  • temperature from -10°C to +40°C
  • humidity from 0% to 75%

• power supply 10-15 VDC
• average current consumption 75 mA
• maximum current consumption 150 mA
• LAN/WAN 100/10Mbit/s operation
• static or dynamic IP address
• plastic enclosure adapted for installation on flat surface e.g. wall
• advanced Digi Connect ME module from Digi Corp
• weight: ≈110.0 g
• CE mark
• environmental conditions of operation:
  • temperature from 0°C to +55°C
  • humidity from 10% to 95%