PrimPrekyba.LTPrekių katalogasElektros instaliacijos sistemosAutomatikaKita elektros įranga bei priedaiReguliuojamas higrostatas, 35-95% 1CO 5A 250VAC, Stego MFR 012

Kategorijos

Reguliuojamas higrostatas, 35-95% 1CO 5A 250VAC, Stego MFR 012

Kategorija: Elektros instaliacijos sistemos

Kodas: EL/MFR012

Modelis: MFR 012

Teirautis šios prekės

Atšaukti

Laiškas sėkmingai išsiųstas.

Klaida! Laiško išsiųsti nepavyko.

Aprašymas

papildoma informacija

Atsisiųsti specifikaciją

Efficient condensation control
Adjustable relative humidity range
High switching capacity
DIN rail mountable

The MFR 012 electromechanical hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion.¹

The MFR 012 can also be used to control cooling fans, warning lights or other devices.

¹ The critical relative humidity level for most components is 65%. Above 65% RH, condensation can form and cause malfunctions of electronic equipment. Long term, this can lead to corrosion and permanent damage of electronic components and systems.

Switching difference	4 %RH (± 3 % tolerance) – at 50 %RH
Permissible air velocity	50 ft/sec (15 m/s)
Contact type	SPDT / change-over contact
Service life	> 50,000 cycles
Min. Switching capacity	100 mA @ AC/DC 20 V
Max. Switching capacity	5 A resistive @ AC 250 V DC 20 W
Connection	3-pole terminal, clamping torque 0.5 Nm max.: solid wire – AWG 14 max. (2.5 mm²) stranded wire^² – AWG 16 max. (1.5 mm²)
Housing	plastic, UL 94V-0, light grey
Mounting	clip for 35 mm DIN rail, EN 60715
Mounting position	variable
Operating / Storage temperature	+32 to +140 °F (0 to +60 °C) / -40 to +140 °F (-40 to +60 °C)
Operating / Storage humidity	max. 95 %RH (non-condensing)
Dimensions	2.64 x 1.97 x 1.5” (67 x 50 x 38 mm)
Weight	approx. 2 oz. (60 g)
Protection type	IP20
Approvals	UL File No. E164102, EAC

² When connecting with stranded wires, wire end ferrules must be used.

Part. No.	Setting range
01220.0-00	35 to 95 %RH

Rekomenduojame įsigyti

Reguliuojamas higrostatas, 35-95% 1CO 5A 250VAC, Stego MFR 012

Jautrus aptikimo kabelis Forteza SE-86 1m

Konverteris RS-485 į USB Forteza RS

Tvorų apsaugos sistema 4 zonų Forteza Tribo-S (4)