Kategorijos
Judesio-mikrobangų jutiklis Anti-masking Pyronix KX15DTAM

Judesio-mikrobangų jutiklis Anti-masking Pyronix KX15DTAM

Kategorija: Apsaugos sistemos
Gamintojas: Pyronix
Kodas: KX15DTAM
Modelis: KX15DTAM
Teirautis šios prekės
Atšaukti
Laiškas sėkmingai išsiųstas.
Klaida! Laiško išsiųsti nepavyko.
Aprašymas
papildoma informacija
Atsisiųsti specifikaciją
  • Dual technology detector using PIR and Microwave sensors
  • Selectable EOL (End Of Line) resistors
  • AND/OR technology
  • Patented Independent Floating Thresholds (IFT)
  • Blue Wave Technology
  • Auto sensitivity feature and digital temperature compensation
  • Triple LED indication
  • Different frequency options avoiding microwave crosstalk
  • Sealed optics
  • Tamper proof brackets included
  • Complies with EN50131-1

 

Detectors technical characteristics

Blue Wave technology Yes
Automatic sensitivity Yes
Set sensitivity Auto or high
Digital temperature compensation Yes
DEOL resistor on board Yes
Tamper protection Front and rear
3 microwave frequencies to avoid interference Yes

Optical, lens and detection characteristics

Maximum range 15m
Volumetric coverage Yes
Dual technology Yes
Detection speed 0.3 – 3.0 m/s
Coverage angle 85 degree
Detection zones 74
Detection planes 7
Anticloaking technology Yes
Protection of area under the detector (creep zone) Yes
White light filter 6500 Lux
Protection Ultraviolet light filter
Lens 3 dimensional
Optics Sealed optics
Detection method Low noise dual element pyroelectric sensor and Microwave Doppler Sensor

Mounting

Wall mounted Bracket included
Ceiling mounted Bracket included
Optimum coverage height 1.8 – 2.4m
Certified mounting height 2.4m

Environmental and operating features

Storage temperature -40C to +80C
Certified operating temperature -10C to +40C
Nominal operating temperature -30C to +60C
Physical dimensions (H x W x D) 117 x 69 x 50mm
Weight 125g without bracket

Electrical & battery

Operating voltage 9-16V DC 13.8V DC typical
Quiescent current consumption 24mA @ 12V (Min), 30mA @ 12V (Max)
Contact Resistance <10 ohms
Relay outputs 50mA 60 VDC, 42 VAC (RMS)
Tamper switch 12V 50mA

Certifications and warranty

Security Grade Grade 2
Environmental class II
EN Certificate EN50131-2-4:2008, EN50131-1, PD6662:2017
Certification type IMQ
Certificate number CA12.01175
Electrical conformity CE

The KX15DT features a Dual element pyroelectric sensor with an X-band DRO based microwave both of which need to be triggered to set off the Alarm, this reduces the risk of false alarms.

With Blue Wave Technology (BWT) and digital temperature compensation, the detector will adjust its sensitivity, further enhancing the detector’s immunity to false alarms and environmental disturbance.

15m Volumetric detector

15m Volumetric detection coverage. Ideal for protection of rooms and offices in commercial environments.

Selectable EOL resistors

The detector incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2, and 1K catering for most control panels on the market.

AND/OR technology

‘AND’ mode operates as a standard dual technology detector, where both technologies need to act to cause the alarm. ‘OR’ mode will switch the activation of the sensor of the alarm input to be either the PIR ‘OR’ Microwave. This can be useful in environments where there is a risk of PIR detection being blocked.

Active self-test

If there is no activation after a 5 hour period it will actually self-test both the PIR and microwave.

Blue Wave Technology (BWT)

This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of some key components:

The new 3D optics system enables perfect focusing of the infra-red signal onto the pyroelectric sensor. This allows BWT to clearly identify the positive and negative signal edges.
Digital temperature compensation digitally adjusts the sensitivity of the detector to ensure performance is maintained
Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.

Auto Sensitivity Feature

Depending on the environment condition, the detector will automatically adjust the sensitivity.

Triple LED indication

Microwave – orange, PIR – green, alarm – blue

Microwave Frequencies Bands

3 different frequency bands to avoid interference between detectors are installed in the same room.

Rekomenduojame įsigyti