PrimPrekyba.LTPrekių katalogasApsaugos sistemosJutikliaiJudesio jutikliaiSkaitmeninis dvigubo elemento judesio jutiklis Pyronix KX15DT

Kategorijos

Skaitmeninis dvigubo elemento judesio jutiklis Pyronix KX15DT

Kategorija: Apsaugos sistemos

Gamintojas: Pyronix

Kodas: KX15DT2

Modelis: KX15DT

Teirautis šios prekės

Atšaukti

Laiškas sėkmingai išsiųstas.

Klaida! Laiško išsiųsti nepavyko.

Aprašymas

papildoma informacija

Atsisiųsti specifikaciją

Dual technology detector using PIR and Microwave sensors
Selectable EOL (End Of Line) resistors
AND/OR technology
Patented Independent Floating Thresholds (IFT)
Blue Wave Technology
Auto sensitivity feature and digital temperature compensation
Triple LED indication
Different frequency options for avoiding microwave crosstalk
Sealed optics
Tamper-proof brackets included
Complies with EN50131-1

Detectors technical characteristics

Blue Wave Technology: Yes

Automatic sensitivity: Yes

Set sensitivity: Auto or high

Digital temperature compensation: Yes

DEOL resistor on board: Yes

Tamper protection: Front and rear

Separate LED indication: Microwave, PIR, Alarm

3 microwave frequencies to avoid interference: Yes

Optical, lens and detection characteristics

Maximum range: 15m

Volumetric coverage: Yes

Dual technology: Yes

Detection speed: 0.3 – 3.0 m/s

Coverage angle: 85 degree

Detection zones: 74

Detection planes: 7

Anti-cloaking technology: Yes

Protection of area under the detector (creep zone): Yes

White light filter: 6500 Lux

Protection: Ultraviolet light filter

Lens: 3 dimensional

Optics: Sealed optics

Detection method: Low noise dual element pyroelectric sensor and Microwave Doppler Sensor

Mounting

Wall-mounted / Ceiling mounted: Bracket included

Optimum coverage height: 1.8 – 2.4m

Certified mounting height: 2.4m

Environmental and operating features

Storage temperature: -40°C to +80°C

Certified operating temperature: -10°C to +40°C

Nominal operating temperature: -30°C to +60°C

Physical dimensions (H x W x D): 117 x 69 x 50mm

Weight: 125g without bracket

Electrical & battery

Operating voltage: 9-16V DC 13.8V DC typical

Quiescent current consumption: 24mA @ 12V (Min), 30mA @ 12V (Max)

Contact Resistance: <10 ohms

Relay outputs: 50mA 60 VDC, 42 VAC (RMS)

Tamper switch: 12V 50mA

Certifications

Electrical conformity: CE

EN Certificate: EN50131-2-4:2008, EN50131-1, PD6662:2010

Certification type: IMQ

Certificate number: CA12.01175

Environmental class: II

The KX15DT features a Dual element pyroelectric sensor with an X-band DRO based microwave both of which need to be triggered to set off the Alarm, this reduces the risk of false alarms.

With Blue Wave Technology (BWT) and digital temperature compensation, the detector will adjust its sensitivity, further enhancing the detector’s immunity to false alarms and environmental disturbance.

15m Volumetric detector

15m Volumetric detection coverage. Ideal for protection of rooms and offices in commercial environments.

Selectable EOL resistors

The detector incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2, and 1K catering for most control panels on the market.

AND/OR technology

‘AND’ mode operates as a standard dual technology detector, where both technologies need to act to cause the alarm. ‘OR’ mode will switch the activation of the sensor of the alarm input to be either the PIR ‘OR’ Microwave. This can be useful in environments where there is a risk of PIR detection being blocked.

Active self-test

If there is no activation after a 5 hour period it will actually self-test both the PIR and microwave.

Blue Wave Technology (BWT)

This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of some key components:

The new 3D optics system enables perfect focusing of the infra-red signal onto the pyroelectric sensor. This allows BWT to clearly identify the positive and negative signal edges.
Digital temperature compensation digitally adjusts the sensitivity of the detector to ensure performance is maintained
Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.

Auto Sensitivity Feature

Depending on the environment condition, the detector will automatically adjust the sensitivity.

Triple LED indication

Microwave – orange, PIR – green, alarm – blue

Microwave Frequencies Bands

3 different frequency bands to avoid interference between detectors are installed in the same room.

Rekomenduojame įsigyti